Skip to content

RC F22 Raptor 700mm V2 (Flyable)

?
Creation quality: 5.0/5 (5 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Full flight video:
https://www.youtube.com/watch?v=_Q6vTO9ouhw&t=201s

https://www.youtube.com/watch?v=F_2Y1o-D7h0

Free test pieces: https://cults3d.com/en/3d-model/gadget/rc-f22-raptor-700mm-v1-flyable-test-pieces

This is a flyable 700mm span RC (Radio Control) rendition of the Lockheed Martin F22-Raptor for 50mm EDF (Electric Ducted Fan). It is intended to be printed in LW-PLA but also works for regular PLA (the included regular PLA version has more structure to support skins).

Features:
- MH-43 airfoil, 1 degree washout
- Easily painted canopy
- Non pineapple panel lines
- 250mm carbon strip wing spar
- 3mm carbon tube taileron axle
- Reinforced tail bearings
- Full flying horizontal stabilizer with concealed pushrod linkages
- 2 wing options. Flaperon+taileron (4 servos) or taileron only (2 servos. This is the preferred set up)
- Hand launch finger grip cut outs
- Wall hanging hook position
- Works with popular drone gear/ batteries
The design has been flown successfully

Print weight:~ 400g
Flying weight: 770g (with 50mm edf, 60A esc, 4S 1300mAh 25C
CG: 87mm (22.6%) from wing LE junction to fuselage on servo cut out front edges
Future:
- Flaperon and leading edge flap mixing
- Thrust vectoring

Additional parts needed:
- 50mm edf, such as FMS 50mm or XRP-50mm http://www.x-flight.com.hk/?sp=2&p=6&cat2=47&cat1=10&cat0=4&id=269&cat1=10&cat0=4&new=&more=&s=65392c13f041145d7f021ff7c08a33ca&lang=en
- 4s 1300mAh 25C battery or above
- 350mm 0.87-1mm piano wire pushrod
- RC gear
- 250mm 3x1mm carbon main spar pultruded strip (x2)
- 50mm 3x1mm carbon rear spar pultruded strip (x2)
- 60mm OD3mmxID2mm carbon taileron axle pultruded tube (x2)
- Velcro J/c
- 35A esc or above
- 2x 9-13g servos (+2x 8-9mm thick servos if using flaperons)
- Optional: 10mm dia.’ magnets for nose
- Thin CA type hinges (optional)

RC Groups Thread: https://www.rcgroups.com/forums/showthread.php?3931791-F22-Raptor-700mm-LW-PLA

Relatively quick and easy print+build.

July2022:
• Confirmed: Flies great 130% scale. 910mm span, 64mm EDF, 2200mAh 4S, 4mm carbons

Jan2022:
• 2 nose added for smaller printers (simple and saw tooth radome)
• Make nose easier to slip on
• Taileron locking pin holes to reduce transport damage
• More clearance vertical stab fin fit
• Fan hatch overhang fix
• 5mm extension taileron axle

Aug2021 --- version included for printing single wall in standard PLA and not just LW-PLA ---

Please take care, be responsible. Have fun!

Further models are coming.

Best regards,
Tim


3D printing settings

LW-PLA Settings
- 2 walls of LW-PLA
- 3-5 bottom layers optional
- Parts are 200mm
- 0% infill
- Print orientation: Fuselage rear bulkheads on build plate (except for afterburner part)

Standard PLA settings
- Single wall
- 0.2mm layer height or suitable
- Brim for nose cone
- 0% infill

3D printer file information

  • 3D design format: PDF and ZIP Folder details Close
    • F-22_Raptor_V2_LW-PLA_130122.zip
      • F22_Raptor_Fuselage/1_piece_nose/f22_raptor_nose_tall.stl
      • F22_Raptor_Fuselage/2_piece_nose/Sawtooth_nosecone/f22_raptor_nose_1_sawtooth.stl
      • F22_Raptor_Fuselage/2_piece_nose/Sawtooth_nosecone/f22_raptor_nose_2_sawtooth.stl
      • F22_Raptor_Fuselage/2_piece_nose/Simple_cut_nosecone/f22_raptor_nose_1.stl
      • F22_Raptor_Fuselage/2_piece_nose/Simple_cut_nosecone/f22_raptor_nose_2.stl
      • F22_Raptor_Fuselage/f22_raptor_canopy.stl
      • F22_Raptor_Fuselage/f22_raptor_ele_horn_cover_l.stl
      • F22_Raptor_Fuselage/f22_raptor_ele_horn_cover_r.stl
      • F22_Raptor_Fuselage/f22_raptor_fan_hatch.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_1.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_2.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_3.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_4.stl
      • F22_Raptor_HStab/f22_raptor_horn_lamination.stl
      • F22_Raptor_HStab/f22_raptor_hstab_l.stl
      • F22_Raptor_HStab/f22_raptor_hstab_r.stl
      • F22_Raptor_HStab/f22_raptor_taileron_horn.stl
      • F22_Raptor_VStab/f22_raptor_rear_vstab_l.stl
      • F22_Raptor_VStab/f22_raptor_rear_vstab_r.stl
      • F22_Raptor_VStab/f22_raptor_vstab_l.stl
      • F22_Raptor_VStab/f22_raptor_vstab_r.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_l_ail_inner.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_l_ail_outer.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l_tip.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l1b.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l1f.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_wing_l1b_no_servo.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_r_ail_inner.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_r_ail_outer.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r_tip.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r1b.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r1f.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_wing_r1b_no_servo.stl
    • F-22_Raptor_V2_Regular-PLA_130122.zip
      • F22_Raptor_Fuselage/1_piece_nose/f22_raptor_nose.stl
      • F22_Raptor_Fuselage/2_piece_nose/Sawtooth_nosecone/f22_raptor_nose_1_sawtooth.stl
      • F22_Raptor_Fuselage/2_piece_nose/Sawtooth_nosecone/f22_raptor_nose_2_sawtooth.stl
      • F22_Raptor_Fuselage/2_piece_nose/Simple_cut_nosecone/f22_raptor_nose_1.stl
      • F22_Raptor_Fuselage/2_piece_nose/Simple_cut_nosecone/f22_raptor_nose_2.stl
      • F22_Raptor_Fuselage/f22_raptor_canopy_front.stl
      • F22_Raptor_Fuselage/f22_raptor_canopy_rear.stl
      • F22_Raptor_Fuselage/f22_raptor_ele_horn_cover_l.stl
      • F22_Raptor_Fuselage/f22_raptor_ele_horn_cover_r.stl
      • F22_Raptor_Fuselage/f22_raptor_fan_hatch.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_1.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_2.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_3.stl
      • F22_Raptor_Fuselage/f22_raptor_fuse_4.stl
      • F22_Raptor_HStab/f22_raptor_horn_lamination.stl
      • F22_Raptor_HStab/f22_raptor_hstab_l.stl
      • F22_Raptor_HStab/f22_raptor_hstab_r.stl
      • F22_Raptor_HStab/f22_raptor_taileron_horn.stl
      • F22_Raptor_VStab/f22_raptor_rear_vstab_l.stl
      • F22_Raptor_VStab/f22_raptor_rear_vstab_r.stl
      • F22_Raptor_VStab/f22_raptor_vstab_l.stl
      • F22_Raptor_VStab/f22_raptor_vstab_r.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_l_ail_inner.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_l_ail_outer.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l_tip.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l1b.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_raptor_wing_l1f.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Left/f22_wing_l1b_no_servo.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_r_ail_inner.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_r_ail_outer.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r_tip.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r1b.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_raptor_wing_r1f.stl
      • F22_Raptor_Wings/F22_Raptor_Wing_Right/f22_wing_r1b_no_servo.stl
    • RC F22 Raptor 3D Printed for 50mm EDF by TimF V2 (Tooly) 310722.pdf

    Learn more about the formats

  • Last update: 2022-08-03 at 13:42
  • Publication date: 2021-08-03 at 14:38

Copyright

©

Tags

Creator

Designs 4
Downloads 697
Sales US$2,026.69
Followers 33
Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment

2 comments


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!