Skip to content

F-16 Fighting Falcon RC 80mm EDF 1200mm

Creation quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Wingspan: 860mm
Length: 1210mm from exhaust to nose (without pitot)
Print weight: 1,2 kg of PLA+
With 6S - 5000mah and 80mm FMS fan : 2,7 Kg
CG: 20-30mm forward the forward hole under the wing (still being tested and tuned. 80-85 mm from the leading edge has been suggested but not tested yet).

Update 22.06.2022: Updated the PDF to include spar length, type and placements.

Update 07.06.2022: Added no landing gear inserts for those who wants to skip landing gear. See photo.

Update 13.05.2022: Wing1 has been split up into wing1-1 and wing1-2 for printers with less printspace than Prusa MK3S. Same print settings as for Wing 1.

See flight video and taxing video here:
Build Video here

Mine is printed with a Prusa MK3S with a bed size of 250 x 210 x 210 mm. Some parts need to be rotated to fit the bed.

The landing struts are homemade and a guide will come soon on those. They are made from standard aluminum pipes, m3 bolts and nuts, some grub screws and springs. Made with a standard drill and dremel tool.

This is a complex plane to print and build. This should not be your first RC plane both to build and to fly. If used for tabletop display only, then its not so hard. A good tuned printer and good bed adhesion is recommended. Some afterwork on a few of the printed parts are necessary. Most parts are printed with 1 perimeter but see the print instruction for details for each part. This guide is not complete yet but it is a work in progress.
Large STL files due to some complex form and high resolution.

If you have any questions, just ask and I will try my best to help.

FMS 80mm EDF -

Servo 9g Metal -

Servo extensions -

Main Retracts -

Nose Retracts -

Servo Connector safety clips -

M3 - 10mm Selftap Screws -50pcs -

1x5mm - 0,5m carbon strip -

10PCS 8x6x500mm Carbon tube -

Neodymium Magnet 10*10*2

PLA+ from SUNLU - 10Kg Pack

Pluss some aluminium tubing, grub screws, m3 nuts and bolt, pushrods.

3D printing settings

See own PDF for printing instructions.

3D printer file information

  • 3D design format: PDF and STL Folder details Close
    • Canopy 1.stl
    • Canopy 2.stl
    • Canopy no-slip bracket.STL
    • Cheater hole bottom.stl
    • Cheater hole top left.stl
    • Cheater hole top right.stl
    • Drag chute.stl
    • Duckt.stl
    • ESC holder.STL
    • Engine bay cover.stl
    • Exhaust.stl
    • F-16 Print and Build instructions.pdf
    • Fuselage 1.stl
    • Fuselage 2 Lower.stl
    • Fuselage 2 lower insert.stl
    • Fuselage 2 upper.stl
    • Fuselage 3.stl
    • Fuselage 4 retracts.stl
    • Fuselage 5.stl
    • Left Aileron.stl
    • Left Wing servo cover.stl
    • Left horizontal stab.stl
    • Left lower fin.stl
    • Left speedbrake.stl
    • Left wing 1-1.stl
    • Left wing 1-2.stl
    • Left wing 1.stl
    • Left wing 2.stl
    • Main landing gear bay insert left.stl
    • Main landing gear bay insert right.stl
    • No landing gear insert L1.stl
    • No landing gear insert L2.stl
    • No landing gear insert R1.stl
    • No landing gear insert R2.stl
    • No nose landing gear insert 1.stl
    • No nose landing gear insert 2.stl
    • Nose Cone.stl
    • Pitot.stl
    • Receiver hatch.stl
    • Right Aileron.stl
    • Right Wing Locking unit.stl
    • Right Wing servo cover.stl
    • Right horizontal Stab.stl
    • Right lower fin.stl
    • Right speedbrake.stl
    • Right wing 1-1.stl
    • Right wing 1-2.stl
    • Right wing 1.stl
    • Right wing 2.stl
    • Rudder_fixed.stl
    • Servo horn rudder.STL
    • Servo horn.STL
    • Servocover Tail Fin.stl
    • Spacer stab.STL
    • Tail fin rudder bottom bracket.stl
    • Tail front.stl
    • Tailfin.stl
    • Top bar tail fin.stl
    • left Wing Locking unit.stl
    • missile holder Right.stl
    • missile holder left.stl

    Learn more about the formats

  • Last update: 2022-07-21 at 22:50
  • Publication date: 2022-05-02 at 15:16





Issue with this design? Report a problem

Makes created by the community

Best sellers of the category Gadget

Add a comment

One comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!