Protective case for DJI Spark UAV
A piece of foam can be placed so that the camera does not move at all. Use a piece of soft foam (see photo).
PLA 1.75 mm, nozzle O, 4, the bed is at 60 ° and the extruder at 215 °, and a quality set to CraftWare (I print with a Craftbot +).
Place the pieces on the back and fasten vertically.
Page translated by automatic translation. Suggest a better translation
Thanks! How about fill density? Should I print it with 100%?
Hello, with PLA of 1.75 mm, nozzle O, 4, the bed is at 60 ° and the extruder at 215 °, and quality set on high quality in CraftWare (I print with a Craftbot +).
Bonjour, avec du PLA de 1,75 mm, buse O,4, le lit est a 60° et l'extrudeur à 215°, et la qualité réglé sur haute qualité dans CraftWare (J'imprime avec une Craftbot+)
Lay the pieces on their back and clip vertically.
Hello, with PLA of 1.75 mm, nozzle O, 4, the bed is at 60 ° and the extruder at 215 °, and quality set on high quality in CraftWare (I print with a Craftbot +).
Bonjour, avec du PLA de 1,75 mm, buse O,4, le lit est a 60° et l'extrudeur à 215°, et la qualité réglé sur haute qualité dans CraftWare (J'imprime avec une Craftbot+)
What printing settings did you use?
Thanks.
Good idea ;-)
Let’s try it.
Looking for a small way to carry it safe in a small backpack.
Suggestion for second model.
I prefer a model out of one pice and where I can snap two battery’s on in-between the legs. (like the original box it comes in)
I think it will be the smallest transportation case/holder possible.
Thank you for your comment
Great design & works/fits perfectly...thanks!
20%