Skip to content

emoji sad cam cover

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.9k views

3D model description

emoji cam cover

Not the most simple print but designed to print in parts and then print as an inlay print.

this is printed on a creality with a .35 nozzle and layer height 0.2 with pla filament off the label by ctrl design

nozzle temp is 210 and bed temp is 62

Please make sure that al the prints are centered in your clicer.

step 1

print the parts of the emoji of your choice except the yellow or red parts.

step 2

print the sad yellow part 1

stay with the printer so you can turn back on the heated bed when the print is done.

do not remove the print from the bed but take the other parts of the emoji and place them in the print.

step 3

this is the tricky part. Make sure that you place this file ( sad part2) 1mm above the z 0. then run it trough the clicer and check if its 1 mm higher than the bed level 0. If you do not do this the nozzle will destroy the print.

If you do this right you can now start the print and it will go over the print witch is still on your bed with all the inlay parts.

step 4

measure the thickness of your device and then print the right comb clip file.

good luck printing

this is a design you can print but not sell copyright is with by ctrl design

3D printer file information

  • 3D design format: STL Folder details Close
    • comp klip 10mm by ctrl design.stl
    • comp klip 20mm by ctrl design.stl
    • comp klip 30mm by ctrl design.stl
    • comp klip 40mm by ctrl design.stl
    • comp klip 50mm by ctrl design.stl
    • sad black by ctrl design.stl
    • sad blue by ctrl design.stl
    • sad yellow part 1 by ctrl design.stl
    • sad yellow part 2 by ctrl design.stl

    Learn more about the formats

  • Publication date: 2018/04/25 at 10:56

Copyright

©

Tags

Creator

Designs 82
Downloads 17.6k
Sales US$509
Followers 164

Love to design easy and more complex files for fdm 3d printing.

Printing with a Opiliones delta printer, Ender, creality cr10 300 and cr10 400

Issue with this design? Report a problem

Best sellers of the category Gadget


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!