Skip to content

Did you 3D print this model?

Dual Color Infinity Headphone Stand

3D model description

The Infinity Headphone Stand is part of my Infinity Series of office/desk accessories (Laptop and Phone Stand are the other 2 designs). This design is a variant on the standard (1 color design). This is intended to be simple, elegant, and relatively easy to print. At 100% scale, this should work for most standard sized headphones.

A simple 2-part design that simply requires gluing the top and base together.

Print takes roughly 8-9 hours.

Visit my website to see more designs and work I have done. www.adylinn.com

STLs included: headphone stand base (primary and secondary), headphone stand top (primary and secondary). Files have been repaired and saved in optimal orientation).

Files included: Print and Finishing Info (.txt and PDF) and License (PDF)

3D printing settings

Recommended Print Settings:
Filament choice is not important (PLA, ABS, HIPS, PETG etc all options).
Use recommended temperature settings for filament chosen (~210 / 70 PLA, ~240 / 110
ABS).
Support optional - holes in top (1g / 0.12m).
Infill - 65% (stand is lightweight so extra infill helps increase weight)
Layer Height - 0.1 - 0.3mm
Speed - 50-80 mm/s or whatever you are comfortable with.
Orientation - bases: flat, tops: laying on back plate, facing upward. Your slicer
should import in the correct orientation. Once you have selected the material for the
4 components (or 2 if printing separately, merge the models for dual extrusion).
Material usage - 150g / 18.98m
Print time - depends on slicer settings but on average I would estimate 8 hours 45
minutes.

  • 3D model format: ZIP

Tags

Creator

Copyright

©

Similar 3D files


Add a comment