Death Stranding Desk Lamp (or cosplay prop)

Death Stranding Desk Light - the perfect gift for any gamer, cosplayer or for your own desk! And even if you might not know this game, you will have an awesome looking desk lamp here.

I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light.
This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts).
I only used screenshots to recreate the original look as close as possible with keeping the printability in mind.
Based on the color of the parts, you can print this in four runs (on a standard 200x200 size printbed) and it will take about 35 hours.
There is a bit of assembly required, you'll find everything that's needed in a detailed assembly instruction (PDF file), you will also find all extra hardware needed in the documentation (basically only some screws, wires, a small switch and led lights).

You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources.

Even though you might find a free version of this out there from me, you will support me and my work with your download and this version is not licensed under the "Creative Commons (4.0 International License) Attribution-NonCommercial" so you might use this for selling the lamp.
Also this version has a few advantages over the free version:

• No watermarks on the parts
• Included STEP file for the "Main Body" so you can change this based on your needs

The lamp is not motorized, the main image is a stop motion animation!

I advise to use the .3mf files, as all parts are already
aligned and ready to print. However, I’ve provided all
.stl files as well!

To have the light frames in two colors, put in a color change step in your slicer.

Use a 0.4mm nozzle.

If you are using the .stl’s, use these settings:
- For black parts with color change (light
frames): 0.15mm layer height, 10-20% infill.
- For black parts without color change):
0.2mm layer height, 10-20% infill.
- For diffusers: 0.2mm layer height, 10-20%
infill, no top layers and honeycomb infill
- For orange parts: 0.2mm layer height, 10-20% infill

• „Hinge 1 Left“ and „Hinge 2 Left“ needs to be printed 2x
• „Hinge 1 Right“ and „Hinge 2 Right“ needs to be printed 3x
• „Desk Mount Arm“ needs to be printed 2x
• All other parts needs to be printed 1x