Storage cube for SD and MicroSD cards. 12 SD / 8 MICROSD OR 4 SD / 40 MICROSD
3D model description
Storage box for 12 SD cards and 8 MicroSD cards.
If you knew the cube for Nintendo Switch cartridges (https://cults3d.com/en/3d-model/game/cube-de-rangement-pour-cartouches-de-jeux-nintendo-switch ), here is the version for SD and MicroSD cards.
It is a small cube that fits in the hand (5.1 cm) and which can store 12 SD cards and 8 MicroSD cards. When you open it, you can see all your cards at a glance, and you can insert and remove them without any effort and without any click. Your cards are perfectly maintained and do not risk being damaged during handling. Finally, its appearance is unique. You can display it proudly on your desk, no need to put it in a drawer.
There are two models available. A smooth, basic. And one with a surface texture.
Assembly guide here (this is for the Switch cartridge version but the principle is the same) : https://youtu.be/1p5rXxDVKFE
You will find all the instructions in Guide-en.pdf.
If you don't have a 3D printer and are interested in this cube, go here: https://lablabstudio.wordpress.com/purchase/
For a cubic cow version of this cube : https://cults3d.com/en/3d-model/gadget/storage-cow-for-sd-and-microsd-cards-12-sd-8-microsd-or-4-sd-40-microsd
For a Nintendo Switch games version : https://cults3d.com/en/3d-model/fashion/cube-de-rangement-pour-cartouches-de-jeux-nintendo-switch
NEW: 3 new files allow you to store up to 32 MicroSD cards in the internal chain.
IMPORTANT: The files you purchase are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you cannot sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.
3D printing settings
Layer height: 0.2 mm (it is certainly possible to make thinner)
Material: PLA (tested), PETG (tested), ABS (probably possible, not tested). DON'T TRY WITH RESIN, IT WON'T WORK.
Printing time: 9h30 - 10h00
Length: 21.5 m
Weight: 64 g
8 - First Link*.stl must be printed with supports.
For the temperatures and printing speeds, you can use the parameters that you master, depending on your printer and your filament.
This object is articulated and requires a high level of precision. Adherence to the build plate is therefore essential. The slightest deformation due to warping would compromise the correct opening and closing of the box. I advise you to use glue or lacquer to improve the adherence.
3D printer file information
3D design format: PDF and ZIP Folder details Close
- Storage Cube v1.1.zip
- Last update: 2020-11-07 at 11:52
- Publication date: 2020-09-01 at 08:30
Collection associated with this 3D model
Best sellers of the category Gadget
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!