A letter opener the size of a credit card.
It is necessary to have a standard razor blade and cut it to the size of the pattern provided in stl.
Program pauses at layer n°11 (positioning of the blade in the "compartment" provided for this purpose), then at layer n°21 (change of colour for the smiley face).
Print out the blade pattern, then cut the blade accordingly (photos).
When positioning the blade, check that it does not overflow from the position (cut it if necessary), then glue it lightly to the glue before restarting the printing, printed for my part on a DAGOMA Neva Magis, the magnets constituting the printing body removed the blade from me!
CAUTION: make sure that the blade does not overflow from the lower layers before restarting the printing, you could damage your print nozzle!!! A razor blade is about 0,08mm thick, the housing is 0,2mm thick, everything is normally ok, but check it well !!!!
Printing in 0.1mm required for modeling ...
Printing time of the pattern for the blade: 1min
Printing time of the paper cutter: 54min
No support or filling is necessary ...
Paper cutter size: 5 cm x 7 cm
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!