CONNECTED CANNABIS CO. tobacco rolling tray. No supports needed. Easy print. Can be epoxy resin coated for that easier clean.
Size: 250.0 x 140.0 x 14.0mm
Massive work area, Clipper lighter holder, half-pipe rolling section, "RAW" labelled section for paper storage, 1-13mm joint measurer's or holders and a small 34mmx30mm accessories storage section.
Specifications of model:
Size: 250.0 x 140.0 x 14.0mm (can be re-scaled, but you will lose correct fittings for the Clipper lighter and paper storage section),
Print weight on Cura using the settings stated below: approximately 163 grams,
And Cura print time (Ender 5 Plus 40mm/s): approximately 34 hours and 24 minutes.
Settings (Cura 4.7 using an Creality Ender 5 Plus):
Nozzle size: 0.4
Layer height: 0.12
Initial layer height: 0.12
Wall thickness: 1.2
Wall line count: 3
Top/Bottom thickness: 0.84
Top thickness: 0.84
Top layers: 7
Bottom thickness: 0.84
Bottom layers: 7
Horizontal expansion: 0
Infill density: 50 (you can have a higher infill density for more strength)
Infill pattern: Grid
Build plate adhesion type: Brim
Generate support: no
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!