Skip to content

Cap Nut Container

3D model description

I needed a box for my M6 nuts and bolts. So I designed this Cap Nut Container.
It is quite large and has a thread close to M64. Unfortunately a metric thread of this size ist hard to print if you want to use a layer height of 0.3mm. I redesigned the thread to have an angle of 80° instead of the normal 60°. The nut and bolt will print fine at layer heights up to 0.3mm.
The threads have a play of 0.5mm. This allows it to scale the parts down to 50% without losing the functionality of the thread. I tested the design on three printers at different layer heights up to 0.3mm and after printing all models were ok.
If you want to print the Cap Nut Container you can choose between three bolt heights (small, medium and large).

  • 3D model format: STL





Similar 3D files

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!