CASE MX MASTER 3 MOUSE 100% PRINTABLE / CASE LOGITECH MOUSE 100% PRINTABLE

This box has been designed to safely store the logitech MX master 3 mouse. Especially suitable for transport given its robustness and size content. The box has 2 locks to ensure that it does not open during transport or handling. I have also added foam pads so that the items inside are not damaged if they receive any blows.

*The MX master 2 model also fits in the box, however it does not fit perfectly like the 3 does.

The file includes several models to create a custom box. These include 3 types of top lids, one plain (without any logo) and two with different logitech MX logos.In addition, a box with an empty (unshaped) interior is also included so you can store any other mouse as well as other items in it.

The hinges have been made with a 4mm diameter aluminum rod (you can buy in any surface dedicated to DIY, reforms or similar), you can also use a M4 screw, but in case of not having something like that have been included a pin of the right size to be able to print it and assemble the box (it is recommended to use the metal rod whenever possible).

The box has an inside size of 131x94x56 and an outside size of 138x113x60.In the photos you can see an exploded animation of the box to be clear about the assembly of the box.

This box has been designed to safely store the logitech MX master 3 mouse. Especially suitable for transport due to its robustness and compact size. The box has 2 latches to ensure that it does not open during transport or handling. I have also added foam pads so that the items inside will not be damaged if they receive any knocks.

*The MX master 2 also fits in the box, however it does not fit perfectly as the MX master 3 does.

The archive includes several models to create a custom case. These include 3 types of top covers, one plain (without any logo) and two with different logitech MX logos.**In addition, a box with an empty (unshaped) interior is also included so that you can store any other mouse and other items in it.

The hinges have been made with an aluminum rod of 4mm diameter (you can buy it in any DIY store or similar), it's also possible to use a M4 screw, but in case you don't have something like that, we have included a pin of the right size to print it and assemble the box (we recommend the use of the metal rod whenever possible).

The box has an inside size of 131x94x56 and an outside size of 138x113x60. In the photos you can see an exploded animation of the box to have clear the assembly of the same.

Boquilla: 0.4 - 0.6

Layer height: 0.2 - 0.3

Filling: 20%

Supports: No

Print speed: 40-50 mm/s

Nozzle: 0.4 - 0.6

Layer height: 0.2 - 0.3

Infill: 20%

Supports: No

Print speed: 40-50 mm/s