A colourful gadget to carry your bottles everywhere and promote plastic bottles reuse.
It can be fixed to your belt, bags, backpack or wherever you want.
You can adapt the model to different bottle neck sizes simpy changing the printing scale, below some examples:
- Gatorade bottle (31.875 mm): 125% scale
- Powerade bottle (38.25 mm): 150% scale
- Chilly's Bottles (38 mm): 150% scale
Propose us any improvement and share your colourful experience! Follow us on Instagram: nabu_3d
You can buy this product made of high grade sintered nylon in our Shapeways shop: https://www.shapeways.com/shops/nabu3d
We reccommends following carabiners, the same in our photos (good quality and low price): https://amzn.to/2CzmqSL
Carabiner hole diameter: 5.5 mm (0,216535 inch.)
Bottle neck hole diameter: 25.5 mm (1,003937 inch.)
Height: 5.5 mm (0,216535 inch.)
Materials: PLA or NYLON (objects in the picture are made of PLA)
Layer height: 0.1 - 0.15 mm
Supports: needed only between the flat surfaces around carabiner holes. (You can tune your support setting to allow support only on horizontal plane, 0 or 90° depending on what slicing software you are using).
Prototyping and custom parts.
Outdoor and sport accessories, gadgets, Arduino, PCB, 3D printing/scanning.
Follow us on Instagram: nabu_3d
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!