Skip to content


Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Stratomaker needs a 3D model that can impress maker and entertain everyone. Why the airplane? Because it points upwards from the start to take flight.

It must be a ready-to-use model for exhibitions or videos where you don't have time to clean the object after printing!
So I chose to create a "print in place" model, with moving parts, to be printed without support. I made the model with overhangs at limit because the printer could show how it can print complex surfaces.

The print time is about one hours and half as it can also have a low filling as 10% or 15%.
At the end of the print the landing gear can be rotated forward, the wheels will free and the propeller will be free to rotate on the pin.


3D printing settings

layer height 0.2 mm
infill 15%
NO supports

3D printer file information





Issue with this design? Report a problem

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!