Skip to content

Makes created by the community

Did you 3D print this model?

ARDUINO UNO PORTABLE LAB CASE

3D model description

Since I bought my Arduino Starter Kit, I always wanted to design a portable ARDUINO case with an integrated Breadboard. A portable Arduino Lab that i can put in the bag and take it with me. It is a very stylish case, with a solid hinge and lock mechanism. It has two side holes to insert a wrist strap.

No supports needed!

3D printing settings

Supports: No
Print Speed: 45 mm/s
Outer Shell Speed: 35 mm/s
Infill: 25%
Layer Height: 150 Micron (0.15 mm)
Shell Thickness: 0.8 mm
Bottom/Top Thickness: 0.8 mm

  • 3D model format: STL

Creator

Followers Following 4
Downloaded 4137
Sales $1,038

I'm an Industrial Designer with a great passion for 3D Printing. I like to create alternative products optimised for FDM Printing Technology.

Copyright

©

Similar 3D files

Best sellers of the category Gadget


Add a comment

18 comments

Used this with an Orangepip Kona328 - UNO Clone.
Case 2 had to be physically modified at he base of the Reset Button tube / support. The case wouldn't fit together without pressing the reset button on the board.
Careful trimming sorted it, nice design. Thank you!

c'est dommage je n'ai pas le droit d'acheter des trucs sur internet et j'aimerais tellement l'imprimer mais bon c'est pas grave

The slots on the case3_updated part don't align very well with the tabs on the breadboard. Other than that, a very clever design. A couple helpful suggestions:

• Use 12 gauge electric wire for the "rigid wire"—it fits nicely in the holes in the hinges
• Use #4 5/8" screws to fasten case 1 and 2

Hi @Rochie! No problem, you can always re-download your files through your personal account on Cults.
After log in to Cults, you can go here: https://cults3d.com/en/orders and click on "View" button.
Or you can reach it by clicking on your avatar --> then "My orders" --> and "View".

just downloaded it(and pay),but unfortunately the size of the zip file is only 2.9MB,while uploading it to a local 3d printer i keep getting and invalid file error. how can I re-download it?

I have a problem what tipe of screw I need? and what is rigid wire?

Hi Mayang. This is not a free Design. Maybe that's why you are having some difficulties downloading it!

How to I get this one? Pleasee

This is really terrific work! Will be printing it soon. Thank you.

@Mynasru, you just have to go in your account: click on your avatar image on the to right of the website. Then go in "My Orders" and you will be able to download the STL!

thx, could you email me the file? it seems like you can only download it once :(

Ofcourse. But is strange that only you had problems with the file.

The .stl file "case3.stl" is not manifold. Could you fix this? The rest of the design is awesome !!