Skip to content

Antonov An-225 Mriya - 1:200

Sere cee ee Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
2.jpg Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
3.jpg Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
4.jpg Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
5.jpg Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
ANITONOV An-225 DESIGN BY CLERX Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
PRINT SETTINGS - LAYER HEIGHT: 0.2MM - OUTER WALLS: 2 - BOTTOM LAYERS: 3 - TOP LAYERS: 5 - INFILL O% cexcerr ror THE STAND: 25%) - NO SUPPORTS - MINIMUM LAYER TIME: 5 SEC Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
REMOVE FAN BLADES BUILT-IN SUPPORTS 1. CUT THE CONNECTING RODS Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
REMOVE STABILIZER BUILT-IN SUPPORTS 1. CUT THE CONNECTING RODS Wns ce 2. REMOVE THE SUPPORT PARTS cay “A VERSION OF THE STABILIZER WITHOUT BUILT-IN SUPPORT IS ALSO INCLUDED Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
REMOVE WING BUILT-IN SUPPORTS “A VERSION OF THE WING WITHOUT BUILT-IN SUPPORT IS ALSO INCLUDED Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Fuselage - Fwd.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Fuselage - Aft.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Stabilizer - Left.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Stabilizer - Right.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Wing - Left.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Wing - Right.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 1.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 2.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 3.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 4.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 5.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Engine 6.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Fan Blades.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Fuselage - Pin.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Stabilizer - Connectors.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Stand.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Wing - Connector.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Wing Tip - Left.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Wing Tip - Right.stl Free STL file Antonov An-225 Mriya - 1:200・3D printable model to download
Share
Add to
Make
?
Creation quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.

Designer

CLERX

CLERX

3D model description

This model is free, please donate to one of Ukraine's relief efforts instead:
https://donate.redcrossredcrescent.org/ua/donate/~my-donation?_cv=1
https://news.un.org/en/focus/ukraine/donate
https://www.comebackalive.in.ua/
Or another organization of your choosing.

Model description:
The Antonov An-225 Mriya (‘Dream’ in Ukrainian) was the largest and heaviest cargo aircraft in the world. The aircraft was an engineering marvel, able to transport up to 250 tonnes of cargo, including single pieces weighing up to 200 tonnes.

During its operation, the An-225 was used to transport a variety of equipment including wind turbine blades, generators, trains and even other aircraft.

The Mriya attracted a high degree of public interest, attaining a global following due to its size and its uniqueness. People frequently visited airports to see its scheduled arrivals and departures.

The only completed An-225 was destroyed in the Battle of Antonov Airport during the 2022 Russian invasion of Ukraine.

Model dimensions:
- Length: 42 cm / 16.5 inch
- Wingspan: 44 cm / 17.3 inch

3D printing settings

  • Layer height: 0.2mm
  • Outer walls: 2
  • Bottom layers: 3
  • Top layers: 5
  • Infill 0% (except for the stand: 25%)
  • No supports
  • Minimum layer time: 5 sec

Minimum required print volume is 77x102x210mm.

Built-in supports are included for the fan blades, stabilizers and wings.
A version of the stabilizers and wings without the built-in supports is included in the ‘additional content’ folder.

For printers with a Z height of 222mm or more, it is suggested to use the ‘one piece’ version of the wings which can also be found in the ‘additional content’ folder.

Model printed with Fillamentum Metallic Grey.
Stand printed with Formfutura EasyWood Pine.

Printed on an Ender 3 Pro.

If you have any issues feel free to contact me using the following form: https://forms.gle/uC4RsWaBPQuzWaYZ8 or via email: clerx3d@outlook.com.

3D printer file information

  • 3D design format: PDF, STL, TXT, and ZIP Folder details Close
    • Additional Content.zip
      • Stabilizer - Left - No Support.stl
      • Stabilizer - Right - No Support.stl
      • Wing - Left - No Support.stl
      • Wing - Right - No Support.stl
      • Wing One Piece - Left - No Support.stl
      • Wing One Piece - Left.stl
      • Wing One Piece - Right - No Support.stl
      • Wing One Piece - Right.stl
    • Engine 1.stl
    • Engine 2.stl
    • Engine 3.stl
    • Engine 4.stl
    • Engine 5.stl
    • Engine 6.stl
    • Fan Blades.stl
    • Fuselage - Aft.stl
    • Fuselage - Fwd.stl
    • Fuselage - Pin.stl
    • Model overview.pdf
    • Report any issues using this link.txt
    • Stabilizer - Connectors.stl
    • Stabilizer - Left.stl
    • Stabilizer - Right.stl
    • Stand.stl
    • Wing - Connector.stl
    • Wing - Left.stl
    • Wing - Right.stl
    • Wing Tip - Left.stl
    • Wing Tip - Right.stl

    Learn more about the formats

  • Last update: 2022-05-29 at 12:17
  • Publication date: 2022-05-27 at 14:41

License

CC BY-NC-ND - Attribution - Non commercial - No derivatives

Tags

Issue with this design? Report a problem.

Makes created by the community

All

Antonov An-225 Mriya - 1:200
Antonov An-225 Mriya - 1:200
Antonov An-225 Mriya - 1:200
Antonov An-225 Mriya - 1:200
Antonov An-225 Mriya - 1:200

Other 3D models from the same designer CLERX

All

Best 3D printer files of the Gadget category

Best sellers of the category Gadget

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!