ADJUSTABLE GPU SUPPORT HOLDER ASUS ROG

Easy print to sell.
You are free to 3D print and sell the printed part.

Check out other GPU supports:
https://cults3d.com/en/design-collections/Rambrand/pc-accessories

Update:
Added a new foot and screw to allow for heights between 50mm-90mm. (see the part list)

This is an ASUS ROG-themed GPU support/holder.
A GPU holder/support prevents GPU sag, which is quite common today because the GPUs are big.

Easy to assemble with no supports.

This model is adjustable from 60mm to 100mm.
Or 50mm to 90mm.
If you need a smaller or bigger height, let me know and I will update the model.

This product contains 3 parts, and no hardware is necessary for assembly.

Part list:
GPU_Foot
Gpu_Foot(50)
Logo_plate
Screw
Screw(50)

This is a very easy print, no supports are needed.

I used Superglue to glue the plate to the body. There are 2 round holes on the plate that will be used to properly align the plate to the foot. Using the 2 round indents on the foot.

Layer height: 0.2
Line width: 0.6
No supports.
Infill: 15%

For the GPU foot on my printer, I had to set "Hole Horizontal expansion" to 0.5mm. This is to allow the screw to turn easier, I recommend you do the same.