Skip to content

The Sandman helm

?
Creation quality: 5.0/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is a digital 3D printable model of Dream's Helm from the Netflix series the Sandman featuring a bendable nose.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces.

The helmet is fully wearable, we recommend scaling the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a comfortable fit.
All cut parts are placed on the print bed as we would print them to save you time.

SIZE
At 100% scale the model’s dimensions are approximately:
Width 230mm
Length 392 mm
Height 737 mm

You can scale the model as you wish, but we can’t guarantee that the model will print well at a much smaller size.

ASSEMBLY INSTRUCTIONS
We recommend testing the size first and seeing if it fits your head first. It is created on an average-sized head. More information about the sizing is here: https://3d-mon.com/sizing-a-3d-printable-model-for-cosplay/
The helmet pieces feature hexagonal slots. Use our hex pegs (included in the download) to connect the pieces.

UPDATES:
V1: Static full-detail helmet.
V2: Rough leather/fabric texture for SLA
V3: Movable bones - use a rubber cord to connect the vertebrae 01-07, make a knot, and hide it by gluing the smallest vertebrae 08 and 09.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/


3D printing settings

We use these settings for most of our prints:
- Layer height 0.2 mm
- Infill 15%
- Supports 45°
We use a 10 mm brim for tall parts with a small base for better bed adhesion.
We try to make the models in a way that uses as little support material as possible.
Printing settings will vary greatly depending on your specific printer.

This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We advise adding cushioning to the inside for a comfortable fit.
The Helmet of Dreams is a mask-like helm owned by Lord Morpheus. It serves as one of Sandman’s three symbols of power along with the sand pouch and the Dreamstone ruby. The helm serves as his sigil.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

3D printer file information

  • 3D design format: ZIP Folder details Close
    • OBJ-Sandman_Helm-3Demon.zip
    • STL the SANDMAN helm by 3DEMON.zip
      • eyes_foil_form/foil form.txt
      • eyes_foil_form/s_man_ver2_left_eye_foil_form.stl
      • eyes_foil_form/s_man_ver2_right_eye_foil_form.stl
      • Sandman_helm_smooth_STL/sandman_helmet_back_left_bottom.stl
      • Sandman_helm_smooth_STL/sandman_helmet_back_left_top.stl
      • Sandman_helm_smooth_STL/sandman_helmet_back_right_bottom.stl
      • Sandman_helm_smooth_STL/sandman_helmet_back_right_top.stl
      • Sandman_helm_smooth_STL/sandman_helmet_eyes_thin_left.stl
      • Sandman_helm_smooth_STL/sandman_helmet_eyes_thin_right.stl
      • Sandman_helm_smooth_STL/sandman_helmet_helmet_left_eye.stl
      • Sandman_helm_smooth_STL/sandman_helmet_helmet_right_eye.stl
      • Sandman_helm_smooth_STL/sandman_helmet_left_forhead.stl
      • Sandman_helm_smooth_STL/sandman_helmet_nose_1.stl
      • Sandman_helm_smooth_STL/sandman_helmet_nose_2.stl
      • Sandman_helm_smooth_STL/sandman_helmet_nose_3.stl
      • Sandman_helm_smooth_STL/sandman_helmet_right_forehed.stl
      • Sandman_helm_smooth_STL/sandman_smooth_uncut_helmet.stl
    • STL_CUT_SANDMAN_fabric_texture_by_3Demon.zip
      • s_man_fabric_back_L_bottom.stl
      • s_man_fabric_back_L_top.stl
      • s_man_fabric_back_R_bottom.stl
      • s_man_fabric_back_R_top.stl
      • s_man_fabric_helmet_lefteye.stl
      • s_man_fabric_helmet_righteye.stl
      • s_man_fabric_L_forehead.stl
      • s_man_fabric_R_forehead.stl
    • STL_UNCUT_sandman_fabric_texture_helmet.zip
      • sandman_fabric_texture_uncut_helmet.stl
    • Sandman_BendableNose_3Demon.zip
      • Sandman_Bendable_Mouth_Piece.stl
      • Sandman_Bendable_Vertebrae_01.stl
      • Sandman_Bendable_Vertebrae_02.stl
      • Sandman_Bendable_Vertebrae_03.stl
      • Sandman_Bendable_Vertebrae_04.stl
      • Sandman_Bendable_Vertebrae_05.stl
      • Sandman_Bendable_Vertebrae_06.stl
      • Sandman_Bendable_Vertebrae_07.stl
      • Sandman_Bendable_Vertebrae_08_09.stl
    • hex pegs.zip
      • peg-hex-16mm_large_3Demon.stl
      • peg-hex-4mm_small_3Demon.stl
      • peg-hex-8mm_medium_3Demon.stl

    Learn more about the formats

  • Last update: 2022-10-31 at 12:21
  • Publication date: 2022-08-18 at 15:14

Copyright

©

Tags

Creator

Issue with this design? Report a problem

Makes created by the community

Best 3D printer files of the Fashion category

Best sellers of the category Fashion


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!