spy X family Cosplay Prop Set

This set includes Anya's hair clips, Yor's stiletto weapons, Earrings, and headband, and Loid's gun. Become your favorite assassin family!

GENERAL

all parts are pre-oriented for best printing. all parts have flat surfaces to ensure good bed adhesion. all parts have minimal overhangs and should not require supports, but there are some small overhangs on the certain pieces that may require some cleanup.

PARTS LIST

Anya Forger's Hair Clips:
2 X anya hair clip base.stl
2 X anya hair clip insert.stl
2 X anya hair clip ring.stl

Yor Forger's Earings:
2 X Yor Earing.stl
2 X Yor Earing Spike.stl
2 X earring hooks (not included)

Yor Forger's Stiletto:
2 X yor stiletto handle.stl
2 X yor stiletto butt.stl
2 X yor stiletto blade 1.stl
2 X yor stiletto blade 2.stl
2 X yor stiletto blade 3.stl
6 X Alignment pin.stl

Yor Forger's Headband:
1 X Yor Headband small.stl OR Yor Headband medium.stl OR Yor Headband large.stl
1 X Yor Flower Left.stl
1 X Yor Flower Right.stl
4 X yor stiletto blade 3.stl
4 X Alignment pin.stl

Loid Forger's Gun:
1 X loid gun grip.stl
1 X loid gun slide.stl
2 X Alignment pin.stl

QUALITY

I suggest a layer height of 0.2mm, a wall thickness of 2 layers, and an infill of 20%.

ASSEMBLY

Anya Forger's Hair Clips:
print all parts for the hair clips. Slide the ring over the top of the base and into the recesses. they should snap into place. use a small amount of glue if necessary. push the inserts into the bottom of the base, they should take a small amount of force. Use glue if necessary.

Yor Forger's Earings:
Print all parts for Yor Foger's Earrings. If necessary pause the print when the loops of the earings are half finished and place earring hooks on the loops so they will be entrapped when the print finishes. Glue the Earring spikes into the bottom of the Earrings.

Yor Forger's Stiletto:
print all the parts for the Stilettos. glue the butt of the stiletto to the handle. insert alignment pins between each of the blade pieces, using glue if necessary. Glue the blade to the handle.

Yor Forger's Headband:
print one of the headband sizes and all the other parts. insert the alignment pins into the bottoms of the blade tips, and then push the blade tips into the holes on the flowers using glue if necessary. Apply glue to the inside of the holes on the bottom of flowers and push the pegs of the headband into the holes on the flowers making sure of the rotation of the flowers so the spikes point in the right direction.

Loid Forger's Gun:
Print all the parts for Loid's gun. Insert The alignment pins into the holes in the bottom of the slide and the top of the handle, and use glue if necessary. push the 2 halves together.