Hey all! Polygon Fox design, I made 2 versions.
- Wall Bust version, it has a support on the back to hang on the wall.
- Mask version, which has two sets of "holes" on the side so that you can put some elastic through it, I didn't want obvious holes so I discretely removed some 'fur', it can be a little difficult to locate so the accompanying images show you where the holes are.
The object orientation, the nose should be pointing up towards the ceiling.
The mask is currently sized for a Pupillary distance of 62mm, but everyone's face is a little different, so please measure your head and eye distance and resize the mask for your face.
Lastly, I don't have a multicolor printer, but I think this would look great as a multicolor print. every fluff of fur is a separate mesh polygon, so theoretically you could separate the objects and assign them a random color value and then print a super cool multicolor design, for anyone who has a multicolor 3d printer please feel free to remix this.
Please follow the instructions listed under printing settings.
For the Bust version, use whatever infill you want, you can probably go with 25 to 30 %, I did 35% on mine and it was a little heavy
For the Mask version, lower infill is better so it's light and easy to wear, without compromising the integrity of wearing it all day.
I would recommend 10% Infill using ZigZag on Cura. ZigZags provide nice support at half the filament and increases the speed.
(I hate the default triangle infill, but if you plan to do triangles then use at least 15%.)
This will need Supports also, but they were easy to remove! Really! Use "Everywhere" for Support Placement, can use default ZigZag; use a minimum angle of 65 degree overhang or less.
There are two sets of holes in the mask for the elastic band, you can use any old elastic, shoelace, hair band, etc...
I would not recommend doing a 'loop behind the ear' approach, I dont know, as a kid I always found that just hurt my ears after a while.
Instead criss cross the elastics like an "X" shape.
Hey! I am a physician who designs 3D prints as a hobby, please enjoy! Most of my 3D designs are actually on Instagram, to explore all of my designs, search: @drfempop
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!