New Sorcery Clima Tact - One Piece

From a longtime favorite anime, Sorcery climatact is Nami's extendable weapon.

Created by Ussop and containing all of Weadaria's gadgets, Nami can create and control the weather, as well as attack with it.

Unfortunately it is not stretchable like in the anime, as it would get too thin in some parts and break easily.

But this Sorcery Clima Tact is assembleable, making it possible to make it the size you want at any time.

Only the tip needs supports on the outside (in the interior it's not necessary).
- The tip and the ball of the handle have to be printed twice.
- Polearm 1 and 2 must be printed in the same quantity.
- The handle is split in two (it has to be split in size.) But if you want, you can resize the length of the handle.
-To assemble, you need a 10mm rod (wood or aluminum) as the model has a 10.20mm hole to have a skeleton.

I usually print my parts with the following definitions:

Quality: 2.8
Walls: 3
Infill: 10% or 15%
Pattern: Zig Zag

The PoleArm 2, I advise you to place 4 walls and 70% to 80% of infill, since it is the connection part that connects the various pieces.

Any doubts do not hesitate to ask. :)
Luck on the Printing and happy cosplay! :D