This smartphone cover for the Motorola Moto E features a falling hearts accent and is designed to be printed in a solid material such as PLA or PETG.
This design is very close tolerance tested design which allows your Moto E to be held snuggly after a gentle snap past the rounded outer lip.
The design was created from an actual Motorola Moto E smartphone purchased in 2020.
Earlier versions of Motorola Moto E smartphones may have slightly different button locations. If you have a Moto E purchased prior to 2020 please verify that your phone and the current version of the Moto E smartphone have all buttons and openings in the same location as the 2020 version.
The image shown was printed in SunLu wood PLA on an Ender 3 Pro, sliced with Cura 3.6 with the back of the case laying on the bed, and created with the following settings:
Nozzle size: 0.4mm
Layer height: 0.12mm
Nozzle temp: 210C
Bed temp: 60C
Wall count: 3
Bottom and top layers: 3
Infill density: 25
Infill pattern: Cubic subdivision
Print speed: 50 mm/sec
Initial layer speed: 25 mm/sec
Retraction distance: 6 mm
Retraction speed: 25 mm/sec
Fan speed: 100%
Build plated adhesion: none
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!