This models is easy to print and is essentially a frame for the filter cloth with rivets to hold the cloth in place.
You will need and elastic strap 1cm wide to attach it to your face.
Print it in PLA or better yet some kind of flexible filament.
Heat the frame with a heat gun or a hair dryer set to high and mold it to your face.
Glue the folds together.
Cut the cloth in line with the template and stab the holes for the rivets.
There is a PDF A4 size template if you have 1mm thick plasticard.
Principle is of heat forming it is the same.
0.2 layer high
50mm/s infill and outer wall speed
Use supports! They are needed for the left side nose overlap part!
Print time for all of the parts is around 3 hours.
I am a cosplayer and a cosplay prop maker.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!