This is the Bad Dragon logo modeled to be able to print in multi color as shown in the pictures. It was a real pain to get this good of a result but now I'm proud and ready to share! Also I included the Fusion 360 files for you! Please don't sue me, Varka! I'm just poor white trash!
This is a 4 Body/STL model of the Bad Dragon logo that includes the Fusion 360 files needed if you want to edit it. To start you need to go into the Cura settings and uncheck "Automatically drop prints" option and in the print settings on the right turn off "remove empty first layer" Otherwise all prints will print on the bed!
How I Printed Multicolor With A Single Nozzle:
I have had success with using Cura and merging the models. Open all the models in one window. Simply right click and merge models, then ungroup them and them models in this order. Do this after setting up the model on the print bed and getting it ready to slice. After ungrouping you can delete the models you don't want to slice.
1st- After following directions above. Delete all the models except the "BD Back" which should be at the bottom. This is the stuff that is white in the pictures and BD logo. Slice this. This should be printed first. After slicing and saving hit undo until all the other models are back.
2nd- Delete all the models except BDblack and BDear. This is the area that is black in the BD logo. DO NOT MOVE THIS. If done right the model should be both floating in the air and in preview it should be printing in the air. It will print on top of the BDback or white/bottom part. Save this and move on
3rd- Repeat step two but for BD red. Undo the deletes you did, and delete all the models but the one that is the lower jaw or red area of the Bad Dragon logo. Again the model should be printing in the air, which in real life will be on top of the BDback model.
REMEMBER TO TUNE PRINT SETTINGS TO THE FILAMENT YOU WILL USE!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!