This is a small bookcase to decorate your shelf. It is printed in parts and then assembled with glue (minus the top cover, which should be removable if you put light).

Assembled, it's 280mm high, 90mm wide and 200mm deep.

(Third Edition: now you can print the empty shelves and the books apart or just the wall, I've added accessories like bottles, a table, a ladder, open book, ect...)

(Second version: I have updated the roof and the lid with holes for magnets (10x2mm) and uploaded a second version of the Candelabra wider to better fit the lights).

It's best to paint it before mounting it, a touch of antiquing looks great.

On the roof you have space to place a small double AA battery with LED lights (typical Christmas lights with white light and thin wire). So you can place the lights inside the lamp hanging from the ceiling (pass the cable through the bottom, so it is not noticeable).

Another option is to print just the floor, the bottom and one side and it will be a perfect bookend.

I don't put the holes in the wires and the front button because this depends on the material, very, very easy to do with household tools or tinkering model.

I recommend lining it with a black felt on the outside, plus so the fabric itself works as a hinge at the top (also glue some magnets to keep it closed).

Can be printed on a 200x200 bed.

It is not necessary to print the supports face up. Only the ceiling may need it or print vertically.

(Accessories may require brackets)