A rat (sulking) sitting on a cheese...
Sculpture realized with Zbrush and Blender, it is printed in 4 parts the whole body/cheese, the muzzle and the 2 ears.
Printing does not require any support.
I made this impression in just over 35 hours, the longest being for body and cheese, just over 30 hours.
Once the assembly is printed, all that remains is to glue all the parts. I used loctite gel glue. For a better finish, the joints on the muzzle and ears (as well as some small printing defects) should be sealed with Milliput paste for example. For my part I use a mixture of plaster and wood glue which gives a quite satisfactory result. Once the joints are dry, all that remains is to sand and apply a smoothing solution if necessary before painting the part.
Height: about 20 cm
Length approx. 15 cm
The Rat license on a cheese is for personal, non-commercial use.
Anycube l3 mega printer
PLA 1.75 printing (3D neofil filament silver)
print quality 0.1
wall thickness 0.8
density filling 20 %
print temperature 200
temp bed 60
3D file format: OBJ
Page translated by automatic translation. Suggest a better translation