A twisting tower standing on a very unnatural hill.
You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. My print with 15% infill and 4 top layers had some small gaps.
I'm someone who always admired artists, but never managed to create anything of my own, not untill I discovered 3D printing.
The first time I held my own creation in my hand, I knew this was my thing, and it has been ever since. Designing and especially learning HOW, is a passion for me.
Almost all my models are made to learn something in the process, and that keeps me improving and branching out to new things. A major motivation also has been the community, who have encouraged and supported my efforts to a point I never dreamed possible!
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!