Skip to content

Turtle

3D model description

Turtle made with Zbrush, it is printed in 7 parts, the shell, the underside of the shell, the head and the legs.

Each part needs a support for printing (cantilever angle adjustment between 50 and 60)

I printed the beast in a little over 46 hours

22-hour shell (x 120 mm, y 136 mm, z 72 mm)

under 10 hours (x 108 mm, y 124 mm, z 32 mm)

legs 7 hours

head 6 hours (x 44 mm, y 68 mm, z 116 mm)

Once the whole printed and after having removed the support it remains only to glue all the parts by starting with the shell, then the back legs and finally the front legs (by checking well each time that it is not wobbly). I used loctite gel glue.

3D printing settings

Anycube l3 mega printer

CURA slicer

PLA 1.75 printing (3D neofil filament silver)

print quality 0.1

wall thickness 0.8

density filling 20 %

print temperature 200

temp bed 60

  • 3D model format: OBJ

Tags

Creator

Followers Following 4
Downloaded 2
Sales $23

Copyright

©

Page translated by automatic translation. Suggest a better translation

Similar 3D files


Add a comment

One comment

Bonjour,
Merci pour le suivi
Cordialement