Skip to content

Tiger head lowpoly

3D model description

Tiger head printed with ABS
You can use PLA or...

They must be printed separately and then glued together

When the device approaches the tip of the teeth, it is advisable to lower the temperature, because of small diameter. I lower it in 3 step from 250° to 235° ( for ABS)

Post processing:
Sandpaper number 80, 120, 200, 400, 600 in bucket of water.
Polish it with soft rag.

3D printing settings

Nozzle temp 245
Heat bed temp 105
Layer height 0.15
Infill 20%
Shells 4
Support yes
Raft & Brim yes
Time 29h 20m
Weight 270
dim: 136mmx157mmx126mm

  • 3D model format: STL



Followers Following 21
Downloaded 595
Sales $736



Similar 3D files

Add a comment

One comment