Skip to content

Thing 1 and Thing 2

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

"Would you like to shake hands
With Thing One and Thing Two?" -The Cat in the Hat

I noticed that Thingiverse didn't have a "Thing" in it... so...

My filament colors are a bit off. The colors should be red, white, and cyan/light blue.

A fine tip permanent marker seems to work for the labeling and, if you want, drawing in the face.

I've included built-in supports for the few parts that needed them.

In order to align the parts, I've left a slot that accepts 1.75mm filament. The slot is 2mm, but you may need to open it up using heat or a file. It can close up due to first layer flattening.

"And then he was gone
With a tip of his hat."

3D printer file information

  • 3D design format: STL Folder details Close
    • Dancing_Blue_Hair.stl
    • Dancing_Red_Body_1.stl
    • Dancing_Red_Body_2.stl
    • Dancing_White_Base_1.stl
    • Dancing_White_Base_2.stl
    • Dancing_White_Chest.stl
    • Dancing_White_Head_1.stl
    • Dancing_White_Head_2.stl
    • High_Five_Blue.stl
    • High_Five_Red_Body_1.stl
    • High_Five_Red_Body_2.stl
    • High_Five_White_Base_1.stl
    • High_Five_White_Base_2.stl
    • High_Five_White_Chest.stl
    • High_Five_White_Head_1.stl
    • High_Five_White_Head_2.stl
    • Thumbs_Down_Red.stl
    • Thumbs_Down_White_Base.stl
    • Thumbs_Down_White_Head.stl
    • Thumbs_UpDown_Blue.stl
    • Thumbs_Up_Red.stl
    • Thumbs_Up_White_Base.stl
    • Thumbs_Up_White_Head.stl
    • Thumbs_White_Numbers.stl
  • Publication date: 2017/06/07 at 13:00





Issue with this design? Report a problem

Best sellers of the category Art

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!