TANTOR Tarzan's elephant - FLEXI - ARTICULATED FIGURE, PRINT-IN-PLACE, CUTE

This large elephant "Tantor" from the animated film Tarzan is an articulated model that is printed on site and does NOT require supports when printing, to attach the head only requires pressure.
3 files are included:
- Tantor_Head.stl
- Tantor_Body.stl
- Tantor_fangs.stl

If you have good adhesion you will not need to activate "Brim". I did not use supports or any additional adhesion, (I added some small protrusions so that the glue prints without problems)

Feel free to share images of your impressions, it would be great!
Don't forget to like and follow us! We will be publishing new models for you!

After printing the parts, you will only have to assemble the head by pressing so that the head fits on the neck.

To legally sell prints of my designs, have access to more designs and surprises, you can get my permission by being part of my community on Patreon through this link:
⭐⭐⭐https://www.patreon.com/boxskull ⭐⭐⭐

You can follow me on:
✔️ https://www.instagram.com/boxskull3d/
✔️ https://www.facebook.com/Boxskull3D

Please help support the creative work of every 3D artist and NEVER share or sell a digital file.

Check out my old desing

BOXSKULL

LITTLE CAT - FLEXI - ARTICULATED FIGURE, PRINT-IN-PLACE, CUTE-FLEXI

• 1.9k views
• 17 likes
• 17 downloads
• 0 comments
• 0 makes

Download US$3.19

• 0.1 - 0.2 layer height all pieces (depending on the quality you want).
• STLs do not need supports.
• Make sure you have good adhesion.
• Print on site, no additional supports needed.
• 10-20% infill.
• 3 walls if a 0.4 mm nozzle is used.