Starwars AT-AT

Requests from FAB365.net have received numerous requests from customers. Among them, there are the most requests for Star Wars items, and this time we created AT-AT, which received the most requests. AT-AT stands for All Terrain Armored Transport and first appeared in the Star Wars .

The characteristics of AT-AT designed this time are first of all,
1) Almost every detail is described. It has described more detail than any AT-AT produced by 3D printing so far.
2) Using the print-in-place and folding structure, almost all movements were implemented with just a few printings.

How to make after printing is as follows.
1. Rotate and attach the neck to the connected lower body.
※ Caution※ If the neck is not attached to the lower body first, the upper body cannot be properly connected later.
2. Put the upper body on the lower body. At this time, use the elasticity to slightly open and fit. Then, attach the side parts to the upper body with adhesive.
3. Push the head and put it on the neck.
4. Fold the ankle and attach it to the leg with adhesive.
5. Push the foot and put it on the leg.
6. Glue the 4 legs prepared in this way to the body.

Since the legs and neck can move in multiple angles, it is possible to create a scene in the movie.

=======================================

▣ You can download FREE at https://fab365.net/items/229

There are many other designs at fab365, some EXCLUSIVE.
And if you become a Fab365 member, you can get awesome FREE items and get PRIORITY purchases of new products.

=======================================

▣ Video Reviews

https://youtu.be/GrJVu2Va14s
https://youtu.be/hv90qwgkzS8
https://youtu.be/BFX1lUvD3Og

=======================================

▣ Printing Tips : https://fab365.net/print-tips-list

=======================================

1 : 144 scale

Size, X 70mm, Y 191mm, Z 157mm

=======================================

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO