Skip to content

STALKER // GI Joe // O-Ring Action Figure

Screenshot-2023-05-03-101824.jpg 3D file STALKER // GI Joe // O-Ring Action Figure・3D print design to download
Screenshot-2023-05-03-102152.jpg 3D file STALKER // GI Joe // O-Ring Action Figure・3D print design to download
Screenshot-2023-05-03-101911.jpg 3D file STALKER // GI Joe // O-Ring Action Figure・3D print design to download
Screenshot-2023-05-03-102013.jpg 3D file STALKER // GI Joe // O-Ring Action Figure・3D print design to download
Screenshot-2023-05-03-102108.jpg 3D file STALKER // GI Joe // O-Ring Action Figure・3D print design to download
Share
Add to
Make
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

Designer

applesandrice

applesandrice

3D model description

"Functions well under high stress situations. Intelligent. Perceptive. Moves like some sort of jungle cat-silent-fast...strong."

Send in the Ranger! Stalker is fully articulated to match his original '82 and subsequent '83 release, he comes complete with recreated accessories!!!

This figure is a brand new sculpt, using original figures and accessories for reference (as much as possible). For funsies, I've included both '82 straight-arm AND '83 swivel-arm options. Also included is my new reproduction of his M-32 "Pulverizer" submachine gun!

Please note -- finished construction of this figure will require additional hardware, including T-hook, O-ring, screws, and rivets. All of these items can be found through the links below. I don't have any connection to these sellers -- these are simply what I use for my own custom G.I. Joe builds.

NECESSARY HARDWARE:
For rivets, I recommend these:
https://www.ebay.com/itm/254737351546

For O-rings, T-hooks, and screws, I recommend these:
https://www.ebay.com/itm/153067094693
3D printing settings

To date, I've only printed my figures on an Elegoo Mars 2 Pro resin printer. I like to print them in white (I've been using Anycubic ECO resin), then stain the pieces before curing. For white resin, I print at .02 mm layer height, with a 2-second exposure time. Prior to curing, I also recommend using a small drill bit to help clean out any excess resin in the rivet/screw holes.

I recommend orienting the arm and leg pieces at 60 degrees. For best results, be sure to orient pieces in order to keep supports away from the figure's joints. All of the joints/connections are optimized to eliminate (or at least greatly reduce) the need for sanding.

3D printing settings

SETTINGS:
Using White AnyCubic ECO resin in an Elegoo Mars 2 Pro printer, I use the following settings:

Layer Height: .02 mm
Bottom Layer Count: 5
Exposure Time: 2.2 s
Bottom Exposure Time: 35 s

3D printer file information

  • Design number: 1212086
  • 3D design format: ZIP Folder details Close
    • GI-Joe_82-83_Stalker_STL files_081923.zip
      • 82 Arms/GI-Joe_82-83_Stalker-82_L_Arm_UPPER.stl
      • 82 Arms/GI-Joe_82-83_Stalker-82_L_Shoulder-Ring.stl
      • 82 Arms/GI-Joe_82-83_Stalker-82_R_Arm_UPPER.stl
      • 82 Arms/GI-Joe_82-83_Stalker-82_R_Shoulder-Ring.stl
      • 82 Arms/GI-Joe_82-83_Stalker-L_Arm_LOWER.stl
      • 82 Arms/GI-Joe_82-83_Stalker-R_Arm_LOWER.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_L_Arm_ELBOW.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_L_Arm_UPPER_BACK_ADJ.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_L_Arm_UPPER_FRONT_ADJ.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_L_Shoulder-Ring_EPR.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_R_Arm_ELBOW.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_R_Arm_UPPER_BACK_ADJ.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_R_Arm_UPPER_FRONT_ADJ.stl
      • 83 Arms/GI-Joe_82-83_Stalker-83_R_Shoulder-Ring_EPR.stl
      • 83 Arms/GI-Joe_82-83_Stalker-L_Arm_LOWER.stl
      • 83 Arms/GI-Joe_82-83_Stalker-R_Arm_LOWER.stl
      • Accessories/GI-Joe_82-83_Stalker-M-32_Submachine-Gun_ADJ.stl
      • GI-Joe_82-83_Stalker-Head.stl
      • GI-Joe_82-83_Stalker-Hips.stl
      • GI-Joe_82-83_Stalker-L-Leg_Upper_INNER.stl
      • GI-Joe_82-83_Stalker-L-Leg_Upper_OUTER.stl
      • GI-Joe_82-83_Stalker-L_Leg_LOWER_ADJ.stl
      • GI-Joe_82-83_Stalker-R-Leg_Upper_INNER.stl
      • GI-Joe_82-83_Stalker-R-Leg_Upper_OUTER.stl
      • GI-Joe_82-83_Stalker-R_Leg_LOWER_ADJ.stl
      • GI-Joe_82-83_Stalker-Torso_BACK_w-Belts.stl
      • GI-Joe_82-83_Stalker-Torso_CHEST_w-Belts.stl

    Learn more about the formats

  • Last update: 2023-08-20 at 01:33
  • Publication date: 2023-05-09 at 18:14

License

CULTS - Private Use

Tags

Issue with this design? Report a problem.

Other designs from the “O-Ring Action Figures” collection created by applesandrice

All

Other designs from the “'82 Joes” collection created by applesandrice

All

Other 3D models from the same designer applesandrice

All

Best 3D printer files of the Sculptures & busts category

Best sellers of the category Sculptures & busts

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Currency: USD
Cults.
100% secure payment with PayPal or Credit Card.