This Spider Robot is a static model and is divided into 10 pieces to be assembled after printing.
The tolerances of the joints have been tested and do not give particular problems (if they are printed well glue is not necessary).
1 x head
1 x body
8 x leg
The legs available for download are in 2 versions, the more complicated version contains tubes, while the simpler version does not have them (if you want to scale the model widely further you should use this to not have problems).
This model was designed to be easily printed. The legs are the most complicated pieces, so they have been designed so as not to require internal supports but only some easily removable supports that start from the printing plate.
The files you will find are a scaled version (50% smaller) of the original design (which was more than 40 cm wide) to be printed in more acceptable sizes. Obviously the model can be further reduced in size.
Hope you like it.
Layer: 0.2 mm or less
Body and Head --> ALL
Legs --> ONLY FROM THE PLATE
Body --> AS EMPTY AS POSSIBLE
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!