This is an Snowman with RGB-flashing LEDs.
The height is about 120mm
There is the snowman itself and a ground plate for LED and a CR2032 coin cell.
With on/off rotary switch.
You need a cr2032 coin cell and a LED. I prefer a RGB-slow flashing LED you can find on Ebay.
I used two LEDs for better shining.
Here is a video on youtube
Use lower infill for better shining.
You need a printer with good overhanging printing property. The hat is 15° to the horizontal.
If you printer is good calibrated, you don't need any post-printing. There are tolerances between the parts. So you can put them together just from the printer
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!