Skip to content

Sci-Fi Lamp Shade

Did you 3D print this model?

3D model description

A very special lamp shade for all the tech enthusiasts, geeks and Star Wars fans out there!

…and for those who love 3d printing ;)

All my test printing was done under the following system:

Macbook Pro, 16GB RAM, Intel Core i7 2.9Ghz


If your build volume is below 30cm on the z axis, you will have to print the split version.

For the lighting I used the Philips Hue system.

The cord is this one: (Affiliate Link from Germany).

Just consider E27 for the fitting or try whatever you need in your country. Contact me, if you need adjustments on the top hole.

If you have any problems printing this or you just want to make some suggestions, do not hesitate to contact me. You can also reach out to me by writing an e-mail to

Please note: this file is for personal use only. If you want to use it commercially just contact me and we will find a fair solution ;)

3D printing settings

My personal print settings:

  • 0.16mm layer height (0.2mm is fine as well and way quicker)

  • 5% infill

  • 10 bottom layers

  • 10 top layers

  • 2 outlines

  • 35 - 40mm/s print speed

  • Z-Offset: -1mm (to create a flat surface)

  • The printing time will take several days, depending on your machine and settings. If you try to print it hollow, it will drastically cut the printing time.

  • recommended material: PLA, black matte


  • you may want to use supports for the top hole. If your adhesion is very good you could also try to print it with the small hole facing down (like I did)
  • some of the structures will tend to sag. But since this whole print is supposed to look grungy it should not be a problem. I did not use any supports
  • 3D model format: ZIP





Similar 3D files

Best sellers of the category Art

Add a comment

One comment

Awesome creation idea and great print!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!