Skip to content

RTS Rocket

?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

I've had a blast designing this helicopter blade spinning assembly that deploys when your Motor ejection charge blasts. Using rubber bands to snap open the blades, they will spin and (hopefully) slow your rockets descent. I also make use of a small drogue chute (9" Estest) which is very undersized on its own for a rocket this heavy but along with the spinning rotor, i've recovered this rocket from launching multiple times. It uses a BT-70 body tube and can fit E and D sized motors (24mm). You will need some M3 screws (4 of them) at either 16 or 18mm along with 4 M3 nuts and the rest can be printed. i've attached a PDF with detailed instructions

Parachute: https://www.amazon.com/Estes-2268-9-Inch-Printed-Parachute/dp/B00TKBM50I
M3 Screws: https://www.amazon.com/gp/product/B07VNDFYNQ
Aluminum Tubing (Optional): https://www.amazon.com/uxcell-Seamless-Aluminum-Straight-Tubing/dp/B07WLN69T1
BT-70 Tube: https://www.apogeerockets.com/Building_Supplies/Body_Tubes/Low_Power_Tubes/56mm_x_18_Body_Tube_Estes_BT-70_size
Kevlar Shock Cord: https://www.apogeerockets.com/Building_Supplies/Parachutes_Recovery_Equipment/Shock_Cord/Kevlar_Cord_100

Check out the video and if you decide to give this a shot, please share a make with me so i can enjoy it!


3D printing settings

-

3D printer file information

  • 3D design format: STL Folder details Close
    • 24mm_Motor_Retainer_Part_A.stl
    • 24mm_Motor_Retainer_Part_B.stl
    • AluminumShaft-BlastPlate-v2.stl
    • AluminumShaft-DrogueSpacer-v2.stl
    • AluminumShaft-HubStops-v2.stl
    • Launch-Lug_Large.stl
    • Launch-Lug_Medium.stl
    • Launch-Lug_Small.stl
    • MotorTube-for-24mm-tube-v2.stl
    • Ocho-RTS-Blade-v3.stl
    • Ocho-RTS-Blade-v5.stl
    • Ocho-RTS-BladeMount-20degree.stl
    • Ocho-RTS-BladeMount-30degree.stl
    • Ocho-RTS-CenteringRing-for-MotorTubes.stl
    • Ocho-RTS-FinJig.stl
    • Ocho-RTS-Hub-v2.stl
    • Ocho-RTS-MotorTube-All-In-1-v2.stl
    • Ocho-RTS-NoseCone-Drogue-v5.stl
    • Ocho-RTS-Shaft-Core-Long-v3.stl
    • Ocho-RTS-Shaft-Top-Drogue-Cone.stl
    • Ocho-RTS-Shaft-Top-Drogue-Flat.stl
    • Ocho-RTS-Shaft-Top.stl
    • OchoRTS-Fin01.stl
    • OchoRTS-Fin02.stl
    • OchoRTS-Fin03.stl

    Learn more about the formats

  • Publication date: 2022-03-21 at 01:02
    ?
    Published to Thingiverse on: 2022-03-21 at 00:02

License

CC BY

Tags

Creator

Issue with this design? Report a problem

Best sellers of the category Art


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!