Skip to content

NyanCat - Optimized for M600 filament swap multicolor printing

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This was a project requested by my son. It is a simple model of Nyan Cat that can be printed as-is, or in multiple colors using the M600 filament swap GCODE command.

The model was scaled to fit a 300x300 print bed, but can be printed at almost any size as long as you only adjust the X and Y axis (or adjust color swap layers accordingly).

3D printing settings

For best results you'll want to print with all top layers and no infill. At 0.2 layer height there are 20 layers, so set your top layers to that number or higher.

There are six colors in total. Start with gray loaded, then swap to beige (color of pop-tart), then pink (frosting and cheeks), then red (sprinkes), then black, then white.

Insert filament swap GCODE (M600) at the following layers: 6, 9, 12, 13, 15, and 18.

3D printer file information





Issue with this design? Report a problem

Best sellers of the category Art

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!