NextLevel 3D-Printing | NextLvL_v1

This is the new level of 3D-Printing.

Inside the .zip-file is the sliced g-code.
It is sliced for the marlin-firmware an a heatbed-size of 200x200mm.
So you can use this g-code for most 3D-Printers. You can also verify the g-code with some tools like gcode.ws, GCode-Viewer...

The cool thing about this print are the nonplanar sliced top-layers. This means that the printer moves x-, y- and z-Axis at the same time.

Don´t pause the print while printing top-layers. This could lead into a crash.

The printing temperature is set to 205°C an the bed temp to 50°C. You can modify this in the g-code.

If you have any questions feel free to contact me or write a comment.

G-Code is already sliced with a special slicer.

Bed-Temp: 50°C
Nozzle-Temp: 205°C
Nozzel-Diameter: 0.4mm

The printer will print a 150mm line from X=10mm (like you can see in the picture). So make sure that the nozzle will not crash in anything.

I printed the model with a creality cr10. You should be able to print this model with every - marlin based - 3D-Printer with an heatbed bigger than 200mmx200mm.
Be carefully and don´t leave the printer while printing top-surfaces.