Skip to content

Nameless Ghoul full mask ghost bc

3D model description

Nameless ghoul mask from the band Ghost. Accurately modeled after the original one. It is wearable and very light weight thanks to 3d printing. Printing time is around 10-12 hours each piece. It is split up into 6 pieces so it can fit into an average printer. I recommend rotating it in the slicer so the flat surfaces where you will have to glue them together lay flat on the bed. Superglue works fine but I used 5 minute epoxy and it is extremely strong.

If you have any ishues with the 3d model, the print or assembling it feel free to contact me

3D printing settings

Tower supports with a 0.3 layer height and 20% infill. Make sure the models lay flat on the edges where they will be glued back so they can fit perfectly. I also suggest using brim and a high temp initial layer so it sticks nicely and doesnt get knocked over. I personally didnt have any problems with the print but if you have any advice leave it in the comments.

  • 3D model format: OBJ



3D artist open for commissions



Similar 3D files

Best sellers of the category Art

Related contents

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!