Mario Mushroom Secret Switch Game Organizer

Top of mushroom easily removes via magnets holding it in place. Undernieth a switch game organiser is revealed.
Mushroom is loaded with 2 secret compartments. One under the top threaded spot, and pulling out the switch game organizer reveals the 2nd.

Plenty of room for additional cabels and acessories.

This time I made it possible to easily print all the parts with a single extruder then put them together. By makeing the spots in the mushroom top flat in the back it shouldnt be a problem to print them out without suports. Just align the flat spots to the build plate.

Top Threaded spot will need suports no matter how you print it.

I still used my Tenlog TL-D3 to print the top shroom spots as well as the spots together in one piece, but if printing them seperatly you may need to add suports in the top mushroom missing the spots.
Eye, and eye centers you may need to scale down 1% and 2% respectivly to press them together and add them to the mushroom base
Divider can be added to the mushroom top to keep things seperated.

Only additional parts needed are 10 3x3mm round magnets easily found on Amazon
https://www.amazon.com/gp/product/B07G12RD42/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Make sure to align the magnets correctly when glueing them in place, and the top of the shroom should attach to the bottom just fine.

Updated 11/16/22
Added a 4 spot combined file for duel extuder printers, and a seperate 1 spot file that will need printed out 4 times.
Clearences on the duel extruder files where two tight, so I added a larger clearence for the spots to fit in when useing a single extruder printer.

Original FREE design here
https://www.thingiverse.com/thing:5135317

Stash Pot version available here
https://cults3d.com/en/3d-model/art/mario-mushroom-stash-pot