Skip to content
STL Low Poly Mammoth, FORMBYTE
Craster 21dfa0fe 6116 4d08 91d7 1db75a3c1db4

Did you 3D print this model?

Low Poly Mammoth

3D model description

Low Poly Mammoth, geometric art sculpture inspired by the extincted animal.

3D printing settings

3d printable model, easy to print.
Suggested materials: plastics, metals
Suggested settings:
Layer height: 0.1 mm
Infill: 100 %

You may also like:
Roaring Lion https://cults3d.com/en/art/roaring-lion
Low Poly Saber Toothed Tiger https://cults3d.com/en/art/saber-toothed-tiger
Low Poly Elephant https://cults3d.com/en/art/elephant-faceted-sculpture

  • 3D model format: STL

Tags

Creator

Followers 138 Following 0
Downloaded 7077
Sales $2,156

FORMBYTE is a design team. We use 3d printing to bring our designs to the world.

Copyright

©

Similar 3D files


Add a comment

One comment

This was the first time I payed for a .stl file and was I dissappointed immediately.
First of all the design is really beautiful, great job done by the designer!
However the mammoth is not a solid volume. Instead it is a hollow structure with thin walls and an entry hole into the body through the nostril of the mammoth.
This makes the part extremely hard to print even with bunch of support structure in the belly of the animal. The walls are at some points only 3-4 lines thick with 0.4mm line thickness (of course 100% infill). This means that essentially it's only possible to have 1 line for inner and 1 line for outer wall. As a consequence the walls are just not looking smooth and the tail of the animal breaks off super easily.
Even harder to print the part at smaller sizes.
I really think it's a shame for this beautiful design because it could be printed so much more beautifully if only the body was a solid object.
It may be useful for stereolithography printers because the thin walls use up less resin and the liquid resin in the inner can be poured out through the nostril after printing.

Hopefully the designer will update a new version of the file that fixes this problem.