King Boo M&M container stash pot

A Mario style ghost floating around, suspended by his enormous tongue! Haha

Free version found here https://www.thingiverse.com/thing:5168166

This version not only contains a crown, but is also a container!
I found that if printed out at 130% its perfect for stashing and dishing out M&Ms
Try printing out at 185% for peanut M&Ms

Been wanting to design this ghost for awhile, but wasn't able to come up with an idea to get it to float around until now. The tongue makes the perfect stand for this Amazing module.

I included two versions of the face, one with the crown and one without.

I split the main ghost in two easy to print pieces. Orient the flat spots on the build plate and other than around the tongue hole you shouldn't need supports.
The mouth insert and tongue print out and fit great at 100% or what ever scale you desire.
The eyes can be a bit tricky to pop into place, Study the module around the eyes and orient them correctly, placing the bottom part of the eye in place then pushing the rest in with a pen does the trick for me. If you have too much difficulty popping them in place try scaling them down 1%
Make sure to put the mouth insert in place before attempting to press the teeth in. It just makes things easier. The teeth should fit in fine printed at 100% but once again, if they are too much trouble try scaling them down 1%
For the treaded part and pins, make sure to align the pin holes with the "T" together so that when its screwed in place everything lines up.

For the crown Jewel, I found this is the perfect time to use "Vase mode" in Cura.
I was so pleased how this turned out I created a version that is actually wearable. Follow me to see as I will be posting pics and the model for free in the near future.

Update 1/14/22 Added 2 body sizes 130% and 190% that use 3mm x 8mm magnets instead of the threads. The magnet holes will keep everything perfectly lined up when placed together.
If your haveing problems with the threads lining up when screwed tight you can try these out. Just dont forget to scale the other pieces up correctly when printing them out.

You can follow me on instagram,

https://www.instagram.com/pla.n.pa/

to find out what I designs I am currently working on.

Thanks for checking out my design!!