Keg Stash Container

The Keg Stash Container, is a simple 2-piece container that can be used as a piggy bank or a stash container. This is a fairly quick, support-free print that has a few options:

Lid:
- Piggy Bank Style: Has a coin slot
- Stash Container Style: Looks like a normal keg top, no coin slot.

Container:
- Blank: Nothing embossed on the outside
- Beer Fund embossed on the outside

Dimensions:
115 mm Tall x 75 mm Diameter

These designs are uploaded with a non-commercial license. Purchasing this file does not grant you the right to sell commercially.

If you would like to consider gaining access to ALL of my models and the rights to print and sell them, you can check out my Patreon at
https://www.patreon.com/thinair3D

Printing Info:

**These are just the settings I used to test the model, feel free to use whatever settings work best for you.

FDM or Resin: FDM
Scaling: Can be scaled up, threads may have issues if scaled down too much.
Supports: None
Infill/Perimeters: 10% infill + 2 perimeters
Nozzle Size: 0.4
Layer Height: 0.2

Printing & Assembly:

"No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. You will need:
- 1 x container - Choose between blank or embossed
- 1 x lid - Choose between coin slot or no coin slot

Assembly:
- Lid threads onto the container.

File List (4):
- container (blank) (STL)
- container (beer fund) (STL)
- lid (coin slot) (STL)
- lid (no coin slot) (STL)"