Horse head printed with ABS
You can use PLA or...
My recommendation for print:
1- Lift the model for about 3mm or 5mm in slicer, above table
2- Change the "support infill type" from "Line" to "Grid" in slicer, you can lower the "Support Infill Ratio" to 25% or so
3- Lower the "Max Overhang Angel" to 45°, you will have a solid Support under model, like photo.
Post processing for ABS:
Sandpaper number 100 ~ 600 in bucket of water.
Polish it with soft rag.
After polishing you can use vegetables oil and rag to make it shine.
Nozzle temp 245
Heat bed temp 105
Layer height 0.15
Raft & Brim yes