EVERYONE can build its own Ecto-1 with the 90 page instruction!
Check out the instructions for free to decide if you are fit for the task! I'm convinced that everyone who can turn on a 3d printer can build this Ecto-1!
Over 60 3d printed parts and 42 LEDs. All parts can be printed on a FDM machine!
The size is about 36,5cm x 12,8cm x 9,2cm (roof of the Ecto-1).
That is about a 1:16,5 scale.
You mainly need the tools and electronics in the picture.
An arduino nano and a DFplayer mini mp3 player.
Thanks to @grafitomi with the build!
You can see the Ecto in action on Youtube:
Or you can watch the build series by LeSanglierQuiRit in 250% size!! Crazy!!
If you have any issues or questions feel free to contact me on Twitter @OneIdMONstr and i will help you with the build!
Fixed an issue with 4_car_floor_mats.stl that could cause problems with some slicers. -> 4_car_floor_mats_fixed.stl
Added the file 34_light_strobe_3x_trans_fdm.stl and 40_siren_top_2x_trans_fdm.stl with slightly thicker walls for fdm printers.
Added round versions for the wheels and stencils.
Updated the schematics. Added Pin D13.
Added 10_license_plate_2x_fdm.stl for our FDM users.
Print in 0.1mm on a FDM machine or with a resin printer if possible.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!