Dune Striker, Articulating Dragon, Flexi Articulated Scorpion Beast, Print in Place, No Supports, Fantasy Creature

Cinderwing3D's Dune Striker!
This is a print-in-place creature that has some fun new features! - And like always, no supports!

*** Impression Lock Tail: The tail pieces snap into each other in the impression to hold the tail in an upright place.
*** Key Latch Tail Tip: Insert key into tail tip and rotate 90 Degrees.

Video of movement here: https://www.tiktok.com/@cinderwing3d/video/7095177314920844590?is_from_webapp=1&sender_device=pc&web_id=6938443651908453893

Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!

This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!

Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)

Commercial License and monthly bonus models:
| Patreon |
| Tribes |

To see all things Cinderwing3D, including all of our models (public and exclusive bonus ones) visit our website:
Cinderwing3D Website

Please see our other public models here:
Cinderwing3D Cults Store

Check us out on our socials!
| Facebook |
| Twitter |
| Instagram |
| Tiktok |

FDM Settings

3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues

Resin Settings

No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.

Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.