Biting dragon

Biting, articulated, fan-winged dragon!!!

This little dragon doesn't spit fire but it bites like crazy, especially the fingers. The body and wings are one piece with no assemblies of any kind, print in place. The wings when you open them for the first time you have to be careful and do it shelf by shelf gently because they have a certain path and if you force them the little stops jump, before opening them see the video in the folder.

3 pieces, plus the eyes.

Very easy to print!!!

Use PLA. The bite varies according to the filament, the stiffer the material, the harder it bites but it breaks before, the idea is to find the balance to get the most out of the figure. Using quality PLA the results are amazing.

Print at 100% scale onwards so that the mechanisms print correctly. Designed to be easy to print and durable.

Before joining the parts together, it is necessary to check that the mechanisms work correctly.

BEWARE! with some filaments it hurts your finger.

I would really like to see your impressions!!!!

If the eyes are printed on filament that lights up at night, the dragon is scary.

UPDATED. I've added the v4 body for printing convenience!!!

Very easy to print!

100% scale onwards so that the mechanisms print correctly.

3 pieces.

The first layer should come out perfect.

Without supports.

No edges.

Nozzle 0.4

Layer 0.2

Wall 1.2 or more

Filling 30% or more.

Figure should be robust.

Position the flat part sticking to the bed.

For any problem do not hesitate to tell me.