Cute Flexi Print-in-Place Squirrel

This Flexi Squirrel is an articulated print-in-place model that needs NO supports.

I created 2 Versions. A short tail and a long tail version. The long tail version curls and sits up. The short tail version doesn't curl up but in my opinion is more fun as a fidget toy.

Included are 4 STL's

*Flexi Squirrel_Curved_Long Tail
*Flexi Squirrel_Straight_Long Tail

*Flexi Squirrel_Curved_Short Tail
*Flexi Squirrel_Straight_Short Tail

Like with all my Flexi's, I went through several iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like my Flexi Squirrel, Check out my other models.

https://www.cults3d.com/en/users/FlexiFactory/creations

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model
of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this link: https://www.patreon.com/FlexiFactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

*No Supports
*Print-in-place (no assembly)
*15-20% infill to be safe
*I always like to use 3 walls
*PLA works great
*make sure you have good bed adhesion if you are printing small (but don't go too small)

When removing the squirrel from the bed, be careful with the front legs, they may break if you try pulling it off the bed. Instead, I find it best to pop them off the plate with the putty knife flat on the bed. Pop them towards the body.