Pop up clover shaped basket. Print in place, can be used as trivet when flat or as a basket when popped up.
Note: This is a very precise print and will only successfully print on well calibrated printers and close following of directions.
Important, must slice at exactly 0.25mm. There is a gap in the model that has to be exactly that height or the rings will either fuse with the base or will droop too much. Also preview the gcode before printing to make sure you have that gap layer, reference the screen shot.
After printing the model will be lightly fused together. I took my print removal spatula and starting at the handle worked the ring and spiral from the base. Go slowly and don't use too much force or you may snap base completely off.
I have been 3D printing since 2012. Many of my designs are inspired by my experience with scroll saw woodworking. Twitter:@patterntoprint Youtube:www.youtube.com/patterntoprint
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!