Itslitho Box Litho Hexaleaf / Lithophane Hexaleaf Box

Hello to all,

You will find in the files different boxes Hexaleaf, to compose as you wish your sequence of lithos ( Or caps with color change)

Dimension of the box H93*W108*P25, parameter of the litho in screen capture in the files for the site itslitho.com, for the parameters of thickness of the litho not to take account of what is in the capture but of your settings mini - maxi.

26 different models ( 13 without background and 13 with background)

These same models are also available with a frame that will be put back in front of the litho, this will prevent the light from passing on the sides and will bring a more aesthetic side.

Added 13 versions with bottom and 1 hole and 13 version with bottom and 1 hole plus border

Assembly with or without glue

You can follow the following link to the guide that has been established on itslitho.com :

https://itslitho.com/lithophane-guides/3d-print-your-own-hexagon-lithophane-hexagon-lithophane-box/

//

Hi there,

You will find in the files different Hexaleaf boxes, to compose as you wish your sequence of lithos (Or covers with color change)

Dimension of the box H93*L108*D25, parameter of the litho in screenshot in the files for the site itslitho.com, for the litho thickness parameters do not take into account what is in the capture but your min - max settings.

26 different models (13 without bottom and 13 with bottom)

These same models are also available with a frame that will come back in front of the litho, this will prevent the light from passing on the sides and will bring a more aesthetic side.

Addition of 13 versions with bottom and 1 single hole and 13 version with bottom and 1 single hole plus border

Assembly with or without glue

you can follow the following link to the guide which has been established on itslitho.com :

https://itslitho.com/lithophane-guides/3d-print-your-own-hexagon-lithophane-hexagon-lithophane-box/

Box between 0.12 and 0.28 depending on the quality desired, possibly put supports in contact with the plate for bridges at the level of the assemblies.

Litho in resin or fdm(0.08/0.12) profile of the facebook group Litho3D

//

Box between 0.12 and 0.28 depending on the desired quality, possibly putting supports in contact with the plate for the bridges at the level of the assemblies.

Litho in resin or fdm(0.08/0.12) facebook group profile Litho3D